Injection molding machine – Spritzgiessmaschinen: Arburg 320 C 500-100 + Multilift H with B-Axis

Location article

Manufacturer

Machine no.

Description

This ARBURG 320 C 500-100 + Multilift H with B-Axis Injection moulding machine was manufactured in 2003 in Germany. It has a clamping force of 500 kN and a screw diameter of 30 mm. The distance between platens is 550 mm and the opening stroke is 350 mm. In total it operated 64000 pump hours. The injection moulding machine comes with a Multilift H with B-Axis, featuring a handling weight gripper plus part weight of max. 5 kg and a swivel range B-axis of 90 degrees. See original tech specs (DE) attached as PDF below.
General Data
Machine weight: 2080 kg

Control Unit
Brand: ARBURG
Model: SELOGICA 3.090

Injection Unit
Screw diameter: 30 mm
Injection pressure: 1550 bar

Clamping unit
Clamping force: 500 kN
Opening stroke: 350 mm
Distance between bars: 550 mm

Additional equipment
: Multilift H with B-Axis: Handling weight gripper plus part weight max. 5 kg, Swivel range B-axis 90 degrees

Machine Benefits
Technical Machine Benefits:
- Mold installation height min. 200 mm
- Clear column spacing 320 x 320 mm
- Mold mounting platens (w x h) 446 x 446
- Drive power of the hydraulic pump 15 kw
- Effective screw length l / d 16. 7
- Screw stroke max. 100 mm
- Calculated stroke volume max. 70 cm3
- Injection part weight max. 64 g / ps
- Injection pressure max. 1550 bar
- Injection flow max. 180 cm3 / s

Condition

Date built

Machine under power