Description | pressure - t
punching cross-cut in cmm -
stroke 20 mm
hole punching perforates max. 30 in 3 mm
plate thickness 4 mm
blade length 205 mm
table-size 700 x 825 mm
cutting capacity stainless steel 3 mm
throat 300 mm
strokes 50 p. min.
oil tank 35 l
total power requirement 3 kW
weight of the machine ca. 720 t
dimensions of the machine ca. 0,7 x 0,83 x 1,1 m
Fixed angle hydraulic punching / notching machine, more automatic cutting gap
regulation and HOLE PUNCHING HEAD.
The cutting head is guided stably in guide columns over the entire stroke
length, so that an exact cut is always made. The cutting angle is negative, i.e.
the knives cut from front to back. This means the sheet metal cannot bend
move forward. The automatic cutting gap adjustment (patented) works
over the lower blades (therefore no tipping of the cutting head and abrasion of
the knife tips) and burr-free cuts are achieved with optimal protection
the knife. When using the punching head, the cutting head is raised, the
punching head mounted and it can be punched with a projection of up to 300 mm
and a maximum of 30 x 3 mm.
The machine is practically maintenance-free and the cutting area is with
shatterproof, transparent plastic. The cutting performance relates
has a strength of 420 N / mm?.
The machine was used in a well-kept small business for the production of
stainless steel special parts are used for kitchens, laboratories and clinics
and were only used by owner served.
The machine is sold because the owners have reached retirement age.
Machine dealer with own stock of 1600 m?.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. |
/uploadpic/tramaofinal_inserat/bilder/104231/bild1.jpg,/uploadpic/tramaofinal_inserat/bilder/104231/bild2.jpg,/uploadpic/tramaofinal_inserat/bilder/104231/bild3.jpg,/uploadpic/tramaofinal_inserat/bilder/104231/bild4.jpg,/uploadpic/tramaofinal_inserat/bilder/104231/bild5.jpg,/uploadpic/tramaofinal_inserat/bilder/104231/bild6.jpg
