Gantry processing centres – Starvision Portal - Machining Center

Location article

Manufacturer

Description

Technical data:
Travel paths
Longitudinal travel / X-axis 3200 mm
Cross travel / Y-axis 3400 mm
Vertical travel / Z-axis 1200 mm

Table clamping area 3000 x 2400 mm
T-slots 13 x 28 x 180 mm
Max. table load 11000 kg

Spindle
Motor power S1 / S6-60% / S6-25% 32 / 43 / 53 kW
Max. torque S1 / S6-60% / S6-25% 819 / 1100 / 1356 Nm
Spindle holder BTT 50-BIG PLUS
Max. spindle speed continuously 6000 1 / min.
2-stage gear drive / HAMADI KOKI - Japan
Distance spindle nose - milling table 350 - 1550 mm
Distance between stands 2800 mm

Feeds
Max. working feed 7000 mm / min.
Rapid traverse X / Y 12000 / Z 15000 mm / min.

General information
Installation area with chip conveyor 10833 x 6680 mm
Height 5702mm
Net weight of the machine with accessories 40000 kg

Standard equipment:
CNC path control Heidenhain iTNC 640
Linear scales from Heidenhain in all X, Y and Z axes
Axis motors from Heidenhain
Spindle motor from Heidenhain
Electronic handwheel from Heidenhain HR-510
Machine in a stable cast design
Linear guides from Schneeberger, size 55 in the X axis, size 65 in the Z / Y axis
Spindle oil cooler
Coolant tank
Complete coolant system
Chip flushing pump
Synchronized tapping / spindle orientation
High precision ball screws grade C3
Double arm gripper tool changer 60 times
Air blast to clean the spindle cone when changing tools
Hydraulic tool clamping system
Hydraulic weight compensation in the Z axis - double cylinder
Automatic central lubrication
Electric cabinet with air conditioning
Full machine cladding with two sliding doors for easy machine access
Twin screw chip conveyor (longitudinal) and hinged belt (transverse)
Low voltage machine light and work status light
RS 232 C, USB, Ethernet communication system and TELESERVICE
Installation elements
CE safety standards

Including the following special accessories / options:
Spindle motor from Heidenhain QAN 320 M (instead of QAN 260 UH)
IKZ cooling through the spindle 20 bar with Grundfos high-performance pump
with microfilter
Air cooling through the spindle via M function
Flush gun
Preparation for electronic dividing head, 4-axis
"AC-2" Automatic universal swivel head / max. speed 3000 1 / min.
A and B axes each indexable by 5° - 72x72 positions
Automatic tool changing and IKZ cooling through the spindle 20 bar
Spindle holder BT 50
Automatic PICK UP for milling head rollers - 2 stations
Y-axis extension at 800 mm (400 mm per side)
Y-axis travel 3400 mm
Chain tool changer 60-fold vertically changing
Renishaw RMP-60 measuring probe for workpiece setup and testing
Measuring probe cycles for Heidenhain TNC 640 installed

Changes and errors in the technical details and information reserved.

Technische Details:
x-axis: 3200 mm
y-axis: 3400 mm
z-axis: 1200 mm
Control: Heidenhain iTNC 640
total power requirement: 65 kVA
weight of the machine ca.: 40 t
dimensions of the machine ca.: 10833 x 6680 m

Condition

Date built

Machine under power